Will the Dockem Koala fit any tablet?
No. The original screw-in Koala is intended for devices or device-and-case combinations up to 11mm thick, and the bracket zones must not block essential ports or controls.
Accessory research profile
Dockem Koala Screw-In Tablet Wall Mount for a DIY family calendar
Two independent brackets make this a flexible, removable tablet mount, but the 11mm thickness limit, side-port positions, wall hardware, and exposed-device design decide whether it fits.
- Research status
- Official product, compatibility, and manual sources checked
- ASIN
- B00JV75FC6
- Checked
- 2026-08-10
Fit verdict
What the evidence supports.
A practical low-profile bracket for a compatible tablet used as a DIY calendar dashboard, not a universal mount for dedicated smart calendar frames.
- Best for
- Households turning a thin tablet into a removable kitchen or hallway calendar and willing to screw two small brackets into a suitable wall.
- Not for
- Devices or case combinations thicker than 11mm, products whose buttons or ports fall behind the brackets, and dedicated calendar frames without verified edge fit.
Specifications
The numbers that decide fit.
These values come from the cited official or manual source. Live retailer variants can change.
- Tracked Amazon ASIN
- B00JV75FC6 Screw-in version.
- Device thickness
- Up to 11mm Official compatibility limit for the original Koala Mount.
- Mount construction
- Two independent ABS brackets Bracket spacing follows the device width.
- Orientation
- Portrait or landscape Port access still needs to be checked in the chosen orientation.
- Cable handling
- Built-in cord clips A cable route and adapter location are still required.
- Included hardware
- Two drywall anchors, two screws, instructions Other walls or studs may need different hardware.
Compatibility gate
Verify all five before checkout.
- Measure the tablet and permanent case together; total thickness must stay within the official limit.
- Mark the bracket zones 1.5–3.75 inches above the lower edge and check every port and button.
- Choose portrait or landscape before drilling because the blocked-edge risk changes.
- Match the fixing hardware to drywall, a stud, masonry, or the actual wall structure.
- Verify the charging cable can enter without a sharp bend and without supporting tablet weight.
Why independent brackets are useful
Because the two supports are positioned separately, the Koala does not depend on one fixed tablet width. That makes docking and removal simple and leaves most of the back open for cooling.
- No plate has to attach to the tablet.
- Bracket spacing can follow portrait or landscape orientation.
- The tablet remains removable for updates and service.
Thickness is the first hard limit
Dockem states that the original Koala forms an 11mm pocket. A tablet plus case that exceeds that depth should not be forced into the brackets; Dockem points thicker devices toward other models.
- Measure the case, not just the tablet specification.
- Check edge taper and camera bumps.
- Do not assume a dedicated calendar frame has tablet-like edges.
Port placement can invalidate an otherwise good fit
Dockem warns that bracket supports can cover controls or ports on smaller devices. A paper mock-up of the bracket zones is more useful than a generic compatibility list.
- Test charging while mounted.
- Keep speaker and microphone openings clear.
- Confirm the power and volume controls remain usable.
Buying path
Verify the selected listing.
Confirm the ASIN, included hardware, dimensions, current terms, and return path on Amazon. No live price, stock, or Prime promise is reproduced here.
Related research
Place the accessory inside the full setup.
Sources
Trace the specifications.
official Dockem Koala Screw-In Wall Mount Official description, installation, compatibility, port, and package-content information. official Dockem Koala compatibility Official 11mm thickness limit and newer-model note. manual Dockem instruction manuals Official support record for the Koala Screw-In Mount.
Common questions
Before placing the order.
Can it hold a Skylight or Cozyla calendar?
SmartFrameLab has not verified those dedicated calendar frames with this mount. Use their own mounting instructions and exact dimensions instead of assuming tablet compatibility.
Can the tablet be removed easily?
Yes. The product uses two open brackets, so a compatible tablet can be lifted out without removing a plate from the device.
Does it include wall hardware?
Dockem lists two self-drilling drywall anchors and two screws. Studs, masonry, or other wall types may require different hardware and tools.